Document the build
Lux sent a post-purchase specification with the dimensions, material, finish, and mounting method.
HomeProject spotlight
Project spotlight · Flat-cut metal signage
Polished-gold stainless steel monogram sign
A 32-inch circular monogram fabricated from 5 mm flat-cut 304 stainless steel, with a polished-gold finish and a specified flush stud mount for an interior wall.
The brief
A reflective finish on a thin metal profile.
The project called for a circular surround and a script monogram with fine curves. The post-purchase specification called for flat-cut 304 stainless steel, with polished gold on the front and edges.
The drawing specified a flush stud mount for an indoor application. The workshop photo shows the actual reflective finish and the back-side studs. It was taken before shipment.
When does flat-cut stainless steel make sense for a gold logo?
It is a good candidate when the buyer wants a thin metal profile and the finish is the main visual feature. Before quoting, check the narrowest parts of the logo, where studs can be placed, and the wall material.
Fabrication details
Build specifications
These are the dimensions and construction specified for this project. The finished photo shows the workshop stage.
- Size
- 32 in. W × 32 in. H
- Metal
- 304 stainless steel
- Thickness
- 5 mm (about 0.20 in.)
- Fabrication
- Flat-cut
- Face and edges
- Polished gold
- Mounting specified
- Flush stud mount
- Application specified
- Interior wall
Project workflow
From construction file to finished sign
Photograph the finished piece
Lux sent the customer finished workshop photos after quality checks and requested shipping confirmation.
Confirm the appearance
The customer confirmed the appearance and shipping address after reviewing the finished photo.
Verified stage: fabricated, photographed and accepted for appearance before shipment.
For sign companies
What to confirm before you quote
Check the finish in the intended light
Polished metal reflects its surroundings. Send a finish reference and wall photo, and ask for a sample if the shade or reflectivity is critical.
Check the artwork and wall together
Send vector artwork, overall size, smallest strokes, wall material, and any fixing restrictions. Ask for the stud layout before fabrication so the installer can review it.
Quoting a similar sign?
Send the vector artwork, dimensions, finish reference, wall material, and mounting requirements for a trade quote.